The Store
The Tools Miscellaneous Section
13 Watt Flourescent Reel Work Light with 30 ft.-16/3 Retractable Cord and Outlet
 | Weiss (we-ALR13RF30GR) 13 Watt Flourescent Reel Work Light with 30 ft.-16/3 Retractable Cord and OutletFeatures: Powder coated steel reel housing. Ballast and on/off switch built in handle. 360?? adjustable hanging hook. Polycarbonate lens with 270?? arc of light. Gounded outlet in handle. 360?? adjustable magnet mounting clip adheres to most metal surfaces. Specificaions: Cord Type Gauge/Length - SJT 16/3, 30 ft. Maximum Rating - 1250 Watt, 10A, 125V / Lamp Raiting .350A, 125V. Mater Cubic Ft. - 1.8 Cubic Feet Master Weight - 40.6 |
OSHA Retractable 35'' Reel Lite with Auto On/Off
 | Weiss (we-ALR500035GSSP) OSHA Retractable 35'' Reel Lite with Auto On/OffFeatures: Powder coated steel reel with automatic switching feature. No switch or outlet in handle. Nylon guard with swivel hook. Specifications: Cord Type/Guage/Length: SJT, 16/3, 35 Ft. Max. Rating: 75 Watt 125V |
Digital Multimeter
 | Weiss (we-AMPAM220) Digital MultimeterFeatures: Measure: AC/DC Voltage up to 600V, AC/DC Current up to 10A, Resistance, Capacitance, Frequency, Duty Cycle AC/DC micro Amps for sensors diagnosis Large Backlight LCD Display Diode Test Audible Continuity Test Data Hold MAX, MIN and Relative measurements Auto and Manual Ranging Auto Power Off (can be disabled) Tilt stand Specifications AC/DC Voltage: 400mV 4.000/40.00/400.0/600 V AC/DC Current: 400/4000?A 40/400 mA 4/10 A Resistance: 400.0 Ohms 4.000/40.00/400.0 kOhms 4.000MOhms/40.00 MOhms Capacitance: 40.00/400.0 nF 4.000/40.00/400.0/4000?F Frequency: 10.00/ 100.0/1000 Hz 10.00/100.0/1000 kHz 10M Hz Duty Cycle: 0.1%_99.9% |
Amprobe AM-45 Pocket Type Multimeter
 | Weiss (we-AMPAM45) Amprobe AM-45 Pocket Type MultimeterFeatures: Oversized, large LCD easy to read Non-contact voltage detection for user safety Autocheck feature (Automatic ACV, DCV and Resistance selection) for user convenience and protection against product misuse Autoranging Auto power off Audible continuity Specifications DC Voltage: 6.000/60.0/450.0V ??(1.5% Rdg + 5 LSD) AC Voltage: 6.000/60.00/450.0V ??(1.5% Rdg + 5 LSD) Resistance: 600.0 6.000/60.00/600.0k ??(2.0% Rdg + 6 LSD) Frequency: 10.00Hz - 30.00kHz ??(0.5% Rdg + 5 LSD) Capacitance: 100.0/1000nF 10.00/100.0?F??(3.5%Rdg+6 LSD) Non-Contact Voltage Detection: Bar Graph Indication 15V to 55V - 30V to 85V - - 55V to 145V - - - 85V to 190V - - - - Above 120V - - - - - |
Advanced Wire Tracer
 | Weiss (we-AMPAT1000) Advanced Wire TracerFeatures: Trace energized lines up to 300VAC or VDC Trace unenergized and open conductors Identifies breakers and fuses without powering down Locates shorts Identifies wires in a bundle Identifies control, alarm and telephone system wiring Traces coaxial cable shield Receiver range 1 to 3 feet from a cable being traced |
2 Ton Tripod Under Hoist Stand
 | Weiss (we-AP1102) 2 Ton Tripod Under Hoist StandFeatures: Ideal for supporting vehicle components under the vehicle All steel construction for added strength Wide base design for load stability Specifications: Max. height: 85-7/8"" (2181 mm) Min. height: 56-1/8"" (1426 mm) Base diameter: 24"" (609 mm) Weight: 40 lbs. (18.14 kg) |
3/8" Palm Ratchet Wrench
 | Weiss (we-AP1113) 3/8" Palm Ratchet WrenchFeatures: Compact size, great for working in tight areas. Lever type throttle control. Lightweight and compact. Specifications: Free Speed (rpm): 160 Air Consumption (1/min): 110(4 CFM) Max Torque: 50ft/lbs Square Drive (inch): 3/8"" Air Inlet (inch): 1/4"" Std. Bolt Size (inch): 3/8"" Length (inch): 8-3/8"" Air Pressure (kg/cm ): 6.2 (90PSI) |
1/4" Air Stubby Ratchet Wrench
 | Weiss (we-AP1114) 1/4" Air Stubby Ratchet WrenchFeatures: Compact and lightweight size Ideal tool for confined working areas, such as under dashboard work and small engine repair Built-in regulator Specifications: Free speed: 240 RPM Max torque: 30 ft-lbs. Air inlet: 1/4"" NPT |
Professional Rivet Nut Tool Kit - Fractional
 | Weiss (we-AP1440) Professional Rivet Nut Tool Kit - FractionalFeatures: 4 interchangeable nosepieces Quick change mandrel One adjustment sets for repeated use Includes 75 assorted rivets Blow molded case Sizes: 6/32"", 8/32"", 10/24"", 10/32"", 1/4""-20 |
Professional Rivet Nut Tool Kit - Metric
 | Weiss (we-AP1441) Professional Rivet Nut Tool Kit - MetricFeatures: 4 interchangeable nosepieces Quick change mandrel One adjustment sets for repeated use Includes 75 assorted rivets Blow molded case Sizes: 3mm, 4mm, 5mm, 6mm |
8pc. Double Cut Carbide Rotary Burr Set with 1/4" Shaft
 | Weiss (we-AP2181) 8pc. Double Cut Carbide Rotary Burr Set with 1/4" ShaftFeatures: All above burrs are 1/4"" shank, USA standard and comes in blow molded case. Set Includes: SA-5: Cylindrical shape 1/2"" X 1"" SA-3: Cylindrical shape 3/8"" X 3/4"" SC-3: Cylindrical radius end 3/8"" X 3/4"" SC-1: Cylindrical radius end 1/4"" X 5/8"" SD-1: Ball shape 1/4"" SD-3: Ball shape 3/8"" SF-3: Tree shaped radius end 3/8"" X 3/4"" SF-5: Tree shaped radius end 1/2"" X 1"" Blow molded storage case |
8 Pc. Carbide Rotary Burr Set with 1/8 Shaft.
 | Weiss (we-AP2182) 8 Pc. Carbide Rotary Burr Set with 1/8 Shaft.Features: Smaller size version of the AP 2181. Includes (2) cylindrical shape, (2) cylindrical with radiused end, (2) ball shape, and (2) cone shape radius end carbide rotary burrs. Includes collet adapter for using 1/8"" shafts in 1/4"" collet tools |
2-1/2 Ton Quick Lifting Hydraulic Floor Jack
 | Weiss (we-AP250DP) 2-1/2 Ton Quick Lifting Hydraulic Floor JackFeatures: Double plunger design for faster lifting 8-9 pumps to full height Holes in sideplates to reduce overall weight without reducing strength Specifications: Min. Saddle Height: 4.33"" (110mm) Max. Saddle Height: 19.3"" (490mm) Chassis Length: 27.5"" (700mm) Height with Handle: 56.5"" (1435mm) Frame Height: 6.5"" (165mm) Saddle Diameter: 4.8"" (123mm) |
Retractable Air Hose Reel with 3/8" x 50 Ft. Rubber Air Hose
 | Weiss (we-AP3636) Retractable Air Hose Reel with 3/8" x 50 Ft. Rubber Air HoseFeatures: Spring driven drum for automatic rewind. Non-snag roller reduces hose wear. Latching mode switch allows choice of free run or latching mode. Multi-position release ratchet, spring fully enclosed and lubricated. Positive latching mechanism automatically locks hose at desired length. Durable, impact reisistant, polypropylene construction. Mounting assembly for easy wall or ceiling installation. 3/8"" x 50 Ft. Rubber Air Hose included. |
Auto-Rewind Air Hose Reel with 3/8" x 50'' Air Hose
 | Weiss (we-AP3688) Auto-Rewind Air Hose Reel with 3/8" x 50'' Air HoseFeatures: Four roller, anti-snag hose guide Adjustable rewind-stop for convenient hose positioning Included Non-Conductive air hose is 3/8"" x 50'' Heavy-duty metal reel construction Specifications: Reel capacity: 3/8"" x 50'' Hose included: Yes Air inlet thread NPT: 1/4"" Air outlet thread NPT: 1/4"" |
Auto-Rewind Air Hose Reel with 1/2" x 50'' Air Hose
 | Weiss (we-AP3689) Auto-Rewind Air Hose Reel with 1/2" x 50'' Air HoseFeatures: Four roller, anti-snag hose guide Adjustable rewind-stop for convenient hose positioning Included Non-Conductive air hose is 1/2"" x 50'' Heavy-duty metal reel construction Specifications: Reel capacity: 1/2"" x 50'' Hose included: Yes Air inlet thread NPT: 3/8"" Air outlet thread NPT: 3/8"" |
Hurri-Clean Spray Gun Washer - Pumpless Design
 | Weiss (we-AP4535) Hurri-Clean Spray Gun Washer - Pumpless DesignFeatures: Pump-less unit eliminates major problem of other units 2.5 gallons (10 liter) solvent tank Takes less than a minute to clean a complete set of painting equipment inside & out Has a 1 gun & 1 cup capacity Less hazardous waste to dispose of Used solvent easily disposed via drain valve Enclosed container operation minimizes painters'' exposure to solvents Pre-assembled and ready to use Unit equipped with auto stop timer Equipped with safety valve Auto shut-off lid switch Low air consumption 1 year warranty Patented |
Air Operated Paint Shaker
 | Weiss (we-AP4550) Air Operated Paint ShakerFeatures: Patent pending orbital drive mechanism Lightweight , heavy duty construction Compact design Lightweight construction Fully adjustable locking rubber coated clamps offer increased grip while shaking 1 year warranty Specifications: Paint can size (Min. & Max.): 1 pint - 1 gallon round cans. Shakes: 1110 cycles per minute Air consumption: 1.37 CFM~1.5CFM Recommended shake time: 2 minutes Operating pressure ranges: 90 to 120 psi at inlet Minimum clamp plate distance: 3-7/8"" (97mm) |
Paint Shaker Stand for AP 4550
 | Weiss (we-AP4551) Paint Shaker Stand for AP 4550Features: Stand designed to be used to mount Astro 4550 - Air Operated Paint Shaker and can be adapted for other paint shakers on the market Designed to be bolted directly into floor or rim and tire Steel construction Easy assembly Unit weight 13lbs Unit dimensions: Height: 36-1/2"" Perch Size: 8-15/16"" x 16-1/4"" (at widest point) |
Mobile Masking Machine
 | Weiss (we-AP4577) Mobile Masking MachineFeatures: Lightweight, easy to use and portable Dispenses rolls up to 18"" in width Sharp, anodized blade for smooth cutting Unit can be used as a step stool |
Straight Punch/Flange Air Tool
 | Weiss (we-AP600ST8) Straight Punch/Flange Air ToolFeatures: 5/16"" punch Performs hole punching and panel crimping Features a rotating head for convenient use Precise control - every pull of the lever delivers a single punch or a single flange crimp Forms an offset crimped edge on sheet metals for no-bump lap welds Lightweight, yet ruggedly built Cuts metal fabrication time in half |
Cordless Rechargeable LED Inspection Light
 | Weiss (we-AP6300) Cordless Rechargeable LED Inspection LightFeatures: Unit has 30 LEDs that provide bright, non-glare light which equals the same brightness as 550 Lumens. LED Lifetime rated up to 100,000 hours. Unit is shatterproof, shock and water resistant. Uses 4.8V-3300mAh-Ni-MH batteries-No Memory Effect-with an active life of approxim ately 6 hours. Full recharge time for batteries is approximately 3 hours. Low battery warning LED light on light panel. Ergonomically designed handle for comfort and durability. Light weight: 1.3lbs Swivel hanging hook included with unit. Battery charger uses standard input 110V AC power. Unit has a wall and/or desk mount recharging station. |
120 LED Underhood Light
 | Weiss (we-AP6310) 120 LED Underhood LightFeatures: 120 LED lights provide bright, non-glare light. 25'' SJTOW 18/2 cord. Unit bar expands from 45"" to 63"" and easily attaches to hood. Attach and detach light from holder for portability. Shatterproof, shock resistant lens cover. 100-240V AC input On/Off switch Lightweight |
Mercedes-Benz & BMW Fan Clutch Service Set
 | Weiss (we-AP78200) Mercedes-Benz & BMW Fan Clutch Service SetFeatures: Set allows servicing of different areas of repair that require a specialty tool due to their confined locations Mercedes-Benz Fan Clutch Wrench allows removal of lock nuts on thermo viscous radiator fans found on Mercedes-Benz and Ford vehicles. Works on M111, OM604, OM6056 and OM606 Mercedes-Benz engines from C & E classes with 36mm opening Mercedes-Benz Fan Clutch Holding Tool allows the technician to hold the water pump pulley in place while loosening the radiator fan to allow removal and replacement of the visco-coupling on the cooling fan Mercedes-Benz Fan Clutch Holding Wrench allows the water pump pulley to be held in place to permit the release of the fan BMW Fan Clutch Holding Wrench allows the water pump pulley to be held in place while the radiator fan is loosened. Holes at 38mm & 44.5mm permits work on BMW M10, M20, M30 and many other late model vehicles Mercedes-Benz Fan Clutch Wrench allows the removal and installation of the fan clutch assembly. The special slim shaft handle design permits easy work in tight areas. Works on Mercedes-Benz M103, M104, M119 and M120 with 65mm opening BMW Fan Clutch Holding Tool allows the removal and installation of the thermo-viscous fan on BMW and Ford with 32mm opening Universal Fan Belt Adjustment Wrench allows work on the radiator fans and pulley belts on Mercedes-Benz, Nissan Quest and Mercury Villager. Also permits work on A/C idler pulley tension lock nuts for A/C installation or adjustment. 2.5mm, 8mm and 10mm Allen keys are included. |
6 Pc. A/C and Fuel Line Disconnect
 | Weiss (we-AP7836) 6 Pc. A/C and Fuel Line DisconnectFeatures: Includes: 5/16"", 3/8"", 1/2"", 5/8"", 3/4"", and 7/8"" sizes. Color coded, anodized aluminum. Comes in molded case. |
7pc. Hose Pliers Assortment
 | Weiss (we-AP9406) 7pc. Hose Pliers AssortmentFeatures: Kit SET INCLUDES: Hose Clamp Pliers (Astro Model # 9409) Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16"" - 2-1/2"" (18mm-54mm) Precision clamp on end of flexible cable allows for extended reach where other models cannot reach Pliers can be locked, freeing up your hands and making your job easier and faster Rubber dipped handle Pliers have a lifetime warranty Cable and spring are wearable items and must be replaced. US Patent # 6,370,985 B1; France Patent # 0012910 Swivel Jaw Hose Clamp Pliers (A'+"" Slot) (Astro Model # 9406B) Swivel Jaw Hose Clamp Pliers (Astro Model # 9406C) Swivel jaws are slotted for positive holding of large or small clamps at any angle Ratchet action holds jaws closed in 5 different positions Fits all automotive and appliance spring wire hose clamps Allows fast and easy clamp removal Pliers latch in position to securely hold hose clamp when expanded Rubber dipped handle Angled Flat Band Hose Clamp Pliers (Astro Model # 9406D) Designed to remove and install flat band hose clamps in hard to reach areas Pliers feature angled jaws with 360?? rotating tips to grip clamps at any angle Locking latch securely holds clamp in position Rubber dipped handle Hose Remover Pliers (Astro Model # 9406E) Designed to allow easy removal of 5/32"" to ?? vacuum and fuel hoses Rubber dipped handle Clic-R Collar Pliers (Astro Model # 9406F) For releasing and re-fitting reusable hose clips For type Clic and Clic-R Flat Band Hose Clamp Pliers (Astro Model # 9406G) Removes and Installs new style flat band hose clamps Jaws rotate 360?? to grip at any angle Rubber dipped handle |