The Store
The Other Electronics29 Other Electronics Shop
Channel Plus Dual Head I/R Remote Emitter/Repeaters
 | Channel Plus Dual Head I/R Remote Emitter/RepeatersInstalls over I/R window of device to be controlledUse with any Channel Plus I/R productNon-blinking LEDXantech reference 283-00/286-00 Dimensions:Length 5 "Width 3 "Height 1 "Weight 0.11 lbs |
Channel Plus High Headroom RF Distribution Amplifier
 | Channel Plus High Headroom RF Distribution AmplifierProvides outputs to 8 TVs, 3 inputs from an off-air antenna or CATV and 2 modulator locations5v42 MHz return path or bidirectional communication for use with digital cable interactive set-top boxesCan be remotely powered from up to 75' away wi Dimensions:Length 8.5 "Width 8.75 "Height 3.5 "Weight 1.3 lbs |
Channel Plus I/R Coaxial Cable Expander
 | Channel Plus I/R Coaxial Cable ExpanderUsed to send IR signals from master DA-550s or 8200s to slave DA-550s or 8200sUp to 8 slave units may be usedA 2181 must be used on each slave unit if IR signals are to be passed Dimensions:Length 5.25 "Width 3.25 "Height 1 "Weight 0.17 lbs |
Channel Plus I/R In-Wall Remote Control Target/Receiver
 | Channel Plus I/R In-Wall Remote Control Target/ReceiverFits inside junction boxDecora wall plate not includedXantech reference 780-10Use 4 connectors to connect to back of 2100A plates Dimensions:Length 7 "Width 3.75 "Height 2.25 "Weight 0.42 lbs |
Channel Plus I/R Remote Target with Stereo Mini Plugs
 | Channel Plus I/R Remote Target with Stereo Mini PlugsHidden Link7' cord with 3.5mm mini plugXantech reference 291-10For use with 2100A plates Dimensions:Length 6.75 "Width 3 "Height 1.75 "Weight 0.56 lbs |
Channel Plus Ivory Dual Data Wall Plate
 | Channel Plus Ivory Dual Data Wall PlateProvides two CaT5e RJ-45 connectorsFast easy termination fo structured wireWide stable base and self-mapping post assignmentsDecora compatible designExcellent solution for home office, bedroom or custom installationAvailable in 3 c Dimensions:Length 8.25 "Width 10.25 "Height 2.25 "Weight 1 lbs |
Channel Plus Powered Injector Wall Plate
 | Channel Plus Powered Injector Wall PlateRemote power with RF input and IR outputDrives standard IR emittersWorks with standard and bi-directional IRBuilt-in circuit breaker Dimensions:Length 5.5 "Width 4.5 "Height 2 "Weight 0.34 lbs |
Channel Plus Rack Mount Adapter for 19" Rack Mount Grid System
 | Channel Plus Rack Mount Adapter for 19" Rack Mount Grid SystemRack Mount Adapter for 19" Rack Mount Grid System Dimensions:Length 19.5 "Width 7.25 "Height 2 "Weight 1.6 lbs |
Channel Plus S-Video and Digital Audio Distribution System with Full I/R Control
 | Channel Plus S-Video and Digital Audio Distribution System with Full I/R ControlSends S-Video or composite video over CAT 5 with digital or analog audio to any room up to 1000' awayAllows I/R control of any connected video source in remote roomInputs for S-Video, composite, digital and analog audioAutomatic optical to Dimensions:Length 4 "Width 10.75 "Height 27.5 "Weight 3.5 lbs |
Channel Plus S-Video Distribution Receiver
 | Channel Plus S-Video Distribution ReceiverReceiver for SVC-10 S-Video distribution systemComposite and S-Video outputsCAT-5 inputsDigital and analog audio outputs12 volt IR target inputs Dimensions:Length 2.75 "Width 12.5 "Height 7 "Weight 2.14 lbs |
Channel Plus S-Video Stereo RF Modulators with I/R Control
 | Channel Plus S-Video Stereo RF Modulators with I/R ControlFull MTS stereo encoding and dbx noise reductionCompatible with Dolby Pro LogicS-Video inputs support both S-Video and composite video feedsI/R emitter output jacks for integrated I/R controlCan power a distribution panel from up to 7 Dimensions:Length 27.75 "Width 10.75 "Height 4.25 "Weight 8.9 lbs |
Channel Plus Single Head Blinking I/R Remote Micro Emitter/Repeater
 | Channel Plus Single Head Blinking I/R Remote Micro Emitter/RepeaterSticks over I/R window of device to be controlledUse with any Channel Plus I/R productBlinking LEDXantech reference 283-00/286-00 Dimensions:Length 5 "Width 3 "Height 1 "Weight 0.13 lbs |
Channel Plus Single Head I/R Remote Control Emitter/Repeater
 | Channel Plus Single Head I/R Remote Control Emitter/RepeaterFor use with 3025Non-blinking LEDXantech reference 283M Dimensions:Length 5 "Width 3 "Height 1 "Weight 0.05 lbs |
Channel Plus Telephone/Coax Wall Plates
 | Channel Plus Telephone/Coax Wall PlatesProvides telephone and coax connections with four break-out lines for telephone and two knock outs for use with coax barrel connectorsFast easy termination of structured wireWide stable base and self-mapping post assignmentsDecora compati Dimensions:Length 10.5 "Width 8.5 "Height 3 "Weight 0.28 lbs |
Channel Plus Tilt Compensator
 | Channel Plus Tilt CompensatorCreates an attenuation loss equal and opposite to cable lossProvides a balanced signal level over long runs Dimensions:Length 5 "Width 3 "Height 1 "Weight 0.07 lbs |
Channel Plus Video/Audio Switcher
 | Channel Plus Video/Audio Switcher5 S-Video or video composite inputs and 5 audio digital or analog inputsI/R control with remoteComposite/S-Video conversionCross conversion of optical to coax digital inputsConvenient front panel inputs and direct source selection1 Dimensions:Length 4.25 "Width 11 "Height 27.5 "Weight 5 lbs |
Channel Plus Wall Plate for Bi-Directional I/R
 | Channel Plus Wall Plate for Bi-Directional I/RInterfaces with industry standard IR targets to bi-directional IR coax panelsIR remote control in/out and RF outWorks with 3108A, 3212A and 3308 coax panels Dimensions:Length 6.25 "Width 3.5 "Height 3 "Weight 0.26 lbs |
Channel Plus Whole House Video Distribution System with Dual Input Modulator and I/R Capability
 | Channel Plus Whole House Video Distribution System with Dual Input Modulator and I/R CapabilityTakes video from CATV or antenna input, audio/video signals from 2 video sources and modulates them to user-selected channels for up to 5 TV locationsUpgradeable to provide infrared remote controlTuning range: UHF 14v64, CATV 65v125Using R Dimensions:Length 12.75 "Width 7.25 "Height 2.25 "Weight 3.13 lbs |
Channel Vision 1 In/4 Out Passive RF Splitter
 | Channel Vision 1 In/4 Out Passive RF SplitterIdeal for antenna or coax operations Dimensions:Length 3.5 "Width 6.5 "Height 2 "Weight 0.96 lbs |
Channel Vision 1 In/8 Out Passive RF Splitter
 | Channel Vision 1 In/8 Out Passive RF SplitterIdeal for antenna or coax operations Dimensions:Length 3.5 "Width 6.5 "Height 2 "Weight 0.87 lbs |
Channel Vision 1' CAT 5, RJ45 Interconnect
 | Channel Vision 1' CAT 5, RJ45 Interconnect 1' CAT 5, RJ45 Interconnect Dimensions:Length 3 "Width 8 "Height 0.25 "Weight 0.09 lbs |
Channel Vision 12 inch Structured Wiring Lid
 | Channel Vision 12 inch Structured Wiring LidUL approved w/sturdy 16 ga. steel constructionModular push and lock componentsIncludes wire management straps Dimensions:Length 17 "Width 15 "Height 5 "Weight 3.78 lbs |
Channel Vision 12" Wiring Panel with Basic Service Module and 4-Way RF Splitter
 | Channel Vision 12" Wiring Panel with Basic Service Module and 4-Way RF SplitterBasic service module with 4-way RF splitter and 6-way telephone distribution12" wiring panel with lidPanel is UL approved with sturdy 16 gauge steel construction Dimensions:Length 17 "Width 15 "Height 5 "Weight 13.01 lbs |
Channel Vision 12" Wiring Panel with Telecom and RF Service Modules
 | Channel Vision 12" Wiring Panel with Telecom and RF Service ModulesBasic service module with 4-way RF splitter and 6-way telephone distribution12" wiring panel with lidPanel is UL approved with sturdy 16 gauge steel construction Dimensions:Length 17 "Width 15 "Height 5 "Weight 13.39 lbs |
Channel Vision 15 dB RF Amplifier
 | Channel Vision 15 dB RF AmplifierIncreases strength of incoming cable or antenna signal for distribution of signal to longer distances and more outputsBi-directional amplifiers with DC/IR passing5v42 MHz return path, 54v1000 MHz forward path Dimensions:Length 8 "Width 9.5 "Height 3.25 "Weight 2.56 lbs |
Channel Vision 15dB RF Amplifier
 | Channel Vision 15dB RF AmplifierProvides gain to signal in long coax cable runsPower injected40 MHzv1 GHz with 5 MHzv42 MHz return path Dimensions:Length 2.5 "Width 5 "Height 6.5 "Weight 1.64 lbs |