The Store
The Greeting Card 17 Gifts/Specialty Section
Masterpiece Lights Flat Card - 5 1/2 X 7 3/4 - 20 Cards /20 Envelopes
 5.5 x 7.75. Acid and Lignin Free. All Flat Cards and Envelopes are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text.Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece First Communion Flat Card - 5 1/2 X 7 3/4 - 20 Flatcards / 20 Envelopes
 5.5 x 7.75. Acid and Lignin Free. All Flat Cards and Envelopes are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Starfish and Dreams ICE CREAM CONE Letterhead - 8 1/2 x 11 - 10 sheets 10 envelopes - 10 sets
 Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Inclusive of Matching Envelope A10EPPINKAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams ICE CREAM CONE Letterhead - 8 1/2 x 11 - 100 sheets
 Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) A10EPPINKAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams ICE CREAM CONE Letterhead - 8 1/2 x 11 - 15 sheets 15 envelopes - 15 sets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Inclusive of Matching Envelope A10EPPINKAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams ICE CREAM CONE Letterhead - 8 1/2 x 11 - 25 sheets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) A10EPPINKAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams ICE CREAM CONE Letterhead - 8 1/2 x 11 - 50 sheets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) A10EPPINKAll NRN products are subject to sales tax when shipped to California. |
Masterpiece Bright Floral Flat Card - 5 1/2 X 7 3/4 - 20 Flatcards / 20 Envelopes
 5.5 x 7.75. Acid and Lignin Free. All Flat Cards and Envelopes are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece White Roses Flat Card - 5 1/2 X 7 3/4 - 20 Flatcards / 20 Envelopes
 5.5 x 7.75. Acid and Lignin Free. All Flat Cards and Envelopes are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text.Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Chili Peppers Flat Card - 5 1/2 X 7 3/4 - 20 Flatcards / 20 Envelopes
 5.5 x 7.75. Acid and Lignin Free. All Flat Cards and Envelopes are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Baby Love Letterhead - 8 1/2 X 11 - 100 Sheets
 100 Sheets. 8 1/2 x 11. Acid and Lignin Free. Envelopes are not included. Letterhead are Shrink-wrapped and easy to print. PRINTING INSTRUCTIONS FOR LETTERHEAD and nbsp; With a ruler, measure from the edge of the 8.5" x 11" piece of paper to your printing area. NOTE: If the design has a border be sure to include that in your measurement. Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Set the measurements according to what you measured in step 1. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your letterhead/border paper. Click here to print the Template |
Masterpiece Margarita Flat Card - 5 1/2 X 7 3/4 - 20 Flatcards / 20 Envelopes
 5.5 x 7.75. Acid and Lignin Free. All Flat Cards and Envelopes are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text.Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece American Flag Flat Card - 5 1/2 X 7 3/4 - 20 Flatcards / 20 Envelopes
 5.5 x 7.75. Acid and Lignin Free. All Flat Cards and Envelopes are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Starfish and Dreams TACO Letterhead - 8 1/2 x 11 - 10 sheets 10 envelopes - 10 sets
 Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Inclusive of Matching Envelope 72EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams TACO Letterhead - 8 1/2 x 11 - 100 sheets
 Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) 72EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams TACO Letterhead - 8 1/2 x 11 - 15 sheets 15 envelopes - 15 sets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Inclusive of Matching Envelope 72EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams TACO Letterhead - 8 1/2 x 11 - 25 sheets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) 72EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams TACO Letterhead - 8 1/2 x 11 - 50 sheets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) 72EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams BIRTHDAY Letterhead - 8 1/2 x 11 - 10 sheets 10 envelopes - 10 sets
 Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Inclusive of Matching Envelope 86EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams BIRTHDAY Letterhead - 8 1/2 x 11 - 100 sheets
 Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) 86EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams BIRTHDAY Letterhead - 8 1/2 x 11 - 15 sheets 15 envelopes - 15 sets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Inclusive of Matching Envelope 86EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams BIRTHDAY Letterhead - 8 1/2 x 11 - 25 sheets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) 86EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams BIRTHDAY Letterhead - 8 1/2 x 11 - 50 sheets
| Stationery Die Cut Top - Laser and Inkjet friendly - 8.5 x 11 Suggested Matching Envelope (sold separately) 86EPAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams CARDS 10 Envelope - 4 1/8 x 9 1/2 - 100 Envelopes
 Stationery 10 Envelopes - Laser and Inkjet FriendlyAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams CARDS 10 Envelope - 4 1/8 x 9 1/2 - 25 Envelopes
| Stationery 10 Envelopes - Laser and Inkjet FriendlyAll NRN products are subject to sales tax when shipped to California. |
Starfish and Dreams CARDS 10 Envelope - 4 1/8 x 9 1/2 - 50 envelopes
| Stationery 10 Envelopes - Laser and Inkjet FriendlyAll NRN products are subject to sales tax when shipped to California. |