The Store
The Greeting Card 33 Gifts/Specialty Section
Masterpiece House Wagon Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Packed Moved Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Snowfall Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Tulips Ribbon Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Tooty Fruity Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Patriotic Pride Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Autumn Quilt Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Jacks Lanterns Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Orange Skeletons Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Bling Bling Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Bold Brown Stripes Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Spa Day Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Mo'S Frogs Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Baubles Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are Shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Red Green Bulb Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Winter Flakes Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Let'S Bbq Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |
Masterpiece Holiday Cheer Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece Christmas Bulbs Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece All I Want For Christmas Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece Poinsettia Christmas Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece Christmas Stripes Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece Snow Dayz Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece Christmas Cookies Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece Argyle Christmas Slim Invitation - 3 7/8 X 9 1/4 - 50 Cards
 Acid and lignin free.Envelopes sold separately.Slim Invitation are packaged in an acetate box. PRINTING INSTRUCTIONS FOR SLIM INVITATIONS Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place the overlay that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom edge of your overlay and amp; add .25" to the measurement. This would be your BOTTOM margin. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your overlay and amp; add .25" to the measurement. This would be your RIGHT margin With a ruler measure from the top edge of the 8.5" x 11" piece of paper to just below the holes for the ribbon on the overlay and amp; add .25" to the measurement. This would be your TOP margin. The LEFT margin will be .25" Note: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with designed product to make sure that text lines up correctly. Make any adjustments to text at this time. Once you are satisfied with your layout, print on your overlay and then assemble your invitations. and nbsp; Click here to print the Template |
Masterpiece Polka Dot Border Flat Card - 5 1/2 X 7 3/4 - 50 Cards
 5.5 x 7.75. Acid and Lignin Free. Envelopes are not included. All Flat Cards are shrink-wrapped. PRINTING INSTRUCTIONS FOR FLAT CARD Click on FILE, then PAGE SETUP. In PAGE SETUP, click on the MARGINS tab. Place your flat card that you are going to print on, on top of and in the upper left hand corner of an 8.5" x 11" piece of paper.This will be used as a guide for measuring purposes for your margins. With a ruler measure from the bottom edge of the 8.5" x 11" piece of paper to the bottom of your printing area on the flat card.This would be your BOTTOM measurement. With a ruler measure from the right edge of the 8.5" x 11" piece of paper to the right side of your printing area on the flat card.This would be your RIGHT margin. The TOP and LEFT margin will be 0" or the width of your border. NOTE: If the design has a border be sure to include that in your bottom and right margin measurement. NOTE: If you set your margin at 0" a screen might pop up in regards to the margins being set outside the area of the page.If this happens, click on ignore. NOTE: In PAGE SETUP, a picture of what your setup will look like is in the PREVIEW window. Click OK. Type in your text. Test print on a blank sheet of paper and compare with design product to make sure that text lines up correctly.Make any adjustments to text at this time. Once you are satisfied with your layout, print on your flat card. Click here to print the Template |