The Store
The HVAC (Heating and Air Conditioning) 2 Parts/Equipment Section
JVCC ATG-7502 ATG Tape (Acid Neutral)
 JVCC ATG-7502 ATG Tape is a permanent unsupported acrylic adhesive transfer film (pressure-sensitive adhesive pre-applied to a special release liner). It is used for picture framing, scrapbooking, product assembly, and for design and packaging prototypes. Has good adhesion to paper, most plastic films, and metal foils. Our supplier for this tape has also recently notified us that this tape is indeed acid neutral. Glass stabilized solvent-based acrylic adhesive. On a 50# gold paper liner. Mounted on cores designed especially for use in tape dispensers (tape dispensing system allows for quick, clean, and easy application). JVCC ATG-7502 ATG Tape, like all ATG tapes, is reverse wound on the roll so it is designed to be used in an ATG dispenser/gun (the 1/4'' width fits in the 3M 714 Applicator/Dispenser and the 1/2'' width fits in either the JVCC ATG1 or 3M 700 Applicator/Dispenser). |
JVCC ATG-7502X ATG Tape (High Tack)
 JVCC ATG-7502X ATG Tape is a permanent unsupported acrylic adhesive transfer film (pressure-sensitive adhesive pre-applied to a special release liner). It is used for picture framing, product assembly, and for design and packaging prototypes. Has excellent adhesion to paper, most plastic films, and metal foils. Glass stabilized solvent-based acrylic adhesive. On a 50# kraft paper liner. Mounted on cores designed especially for use in tape dispensers (tape dispensing system allows for quick, clean, and easy application). JVCC 7502X ATG Tape, like all ATG tapes, is reverse wound on the roll so it is designed to be used in an ATG dispenser/gun (see the JVCC ATG1 or the 3M 700 Applicator/Dispenser we also sell). |
Markal B Paintstik Solid Paint Marker
 Markal B Paintstik Solid Paint Marker is a solid paint marker used for marking on any material or ambient surface. It is a lead-free paint in stick form which combines long-lasting durability of paint with ease-of-use of a crayon. Used on metal, wood, plastic, concrete, rubber, glass, cardboard and paper. Can mark on smooth, rough, rusty or dirty surfaces and also marks through oil and water. |
JVCC BR-1 Barricade Tape
 JVCC BR-1 Barricade Tape is a NON-ADHESIVE barrier tape for barricading off restricted, work, or hazardous areas. Stock legends including ''Caution'', ''Caution Buried Electric/Water/Sewer Line Below'', ''Caution Construction Area'', ''Caution Do Not Enter'', ''Caution Gas Mask Job'', ''Caution Wet Floor'', ''Crime Scene Do Not Cross'', ''Danger'', ''Danger Asbestos'' and ''Police Line/Fire Line Do Not Cross'' can be chosen. Thicknesses range from 2 mils to 3 mils depending on the legend ordered. |
ISC BR-CHECK Checkerboard Barricade Tape
 ISC BR-CHECK Checkerboard Barricade Tape is a NON-ADHESIVE barrier tape used for barricading off or calling attention to areas such as pit spots. No more hassles of saving spots with trash cans or cones. Tape has white and light black diamonds. This tape is not meant to be used as ''Finish Line Tape'' since it will not break/tear easily if ran through. |
Pro Tapes Cable-Path Cable Path Tape
 Pro Tapes Cable-Path Tape is a zone coated gaffers tape. This unique product is designed to make the advancement of cable a breeze. Pro Tapes Cable Path Tape is a premium vinyl coated cloth tape that is coated on both edges with a premium cured rubber adhesive system. The center portion has a smooth surface for pulling cable and wire through easily without binding (approximately 3.25 inches on the 6 inch tape). The high performance adhesive will hold firmly for extended periods of time on most surfaces and removes without residue. Matte gaffer backing for low reflectivity of light and the backing is hand tearable. |
JVCC CAM-01 Premium Grade Camouflage Duct Tape
 JVCC CAM-01 Premium Grade Camouflage Duct Tape is a premium grade heavy duty camouflage duct tape. JVCC CAM-01 camouflage duct tape is multi-colored and features a natural rubber-based adhesive and an 80 mesh polyethylene coated cloth waterproof backing. |
JVCC CFL-5A Copper Foil Tape (NON-Conductive Adhesive)
 JVCC CFL-5A Copper Foil Tape is a 1 oz. rolled copper foil which provides excellent solderability and conformity. Used for EMI/RFI shielding of small electromagnetic components (i.e. transformer/reactor coils) and cable splices; repairing, modifying & prototype designing of wiring boards, supplementary shielding of joints/seams; and flat conductor assemblies. Annealed and non-tarnishing, bright copper color. Its aggressive acrylic adhesive system creates a superior bond. This tape is does NOT have conductive adhesive - please see JVCC CFL-5CA for a copper foil tape with conductive adhesive. Flammability: File #130121, UL 510, Section 4. Can also be used for decorative arts & crafts projects. |
JVCC CFL-5CA Copper Foil Tape (Conductive Adhesive)
 JVCC CFL-5CA Copper Foil Tape is a 1 oz. rolled copper foil which provides excellent solderability and conformity. Used for RFI/EMI (electromagnetic interference/radio-frequency interference) shielding applications in the electrical/electronics industry (used to shield integrated circuit chips, cables and motors). CFL-5CA is coated with an acrylic adhesive which is uniformly dispersed with conductive spheres to provide a very low rate of electrical resistance through the tape (0.003 Ohms/square inch). Its conductive adhesive is ideal for printed circuit board modification, security-alarm circuit repairs, and prototype wiring-board layout and design. Also for cable wrapping to provide EMI/RFI shielding, seaming of EMI/RFI shielded rooms for electrical continuity, static charge draining and for surface contact to non-solderable materials (e.g. aluminum or plastics). Its aggressive acrylic adhesive system creates a superior bond. Annealed and non-tarnishing, bright copper color. Flammability: File #130121, UL 510, Section 4. Can also be used for decorative arts & crafts projects. Please note that the narrowest width this tape can be cut to is 1/4 inch or 6.3mm. |
Sigma Classic Blown Stretch Film
 Sigma Classic Blown Stretch Film is a premium grade, blown hand film with unrivaled load-handling force and unparalleled puncture resistance. The stretch and toughness of blown film ensures enhanced protection for regular loads and extra protection for hard-to-hold ''C'' loads. Classic Blown offers toughness, strength and superior tear resistance. Sigma Stretch Film is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Applications include brick and block, warehouses, irregular loads, transportation industry, food distribution, bagged products, boxed products. Made in the U.S.A. |
Shurtape COL-00 Colonial Premium Grade Masking Tape
 Shurtape COL-00 Colonial Premium Grade Masking Tape is used for general purpose masking where a premium performance tape is needed. Conformability, easy unwind, high tensile strength, and flexible backing make it an excellent performing premium tape. The tape also had good quick stick and resists water, solvents and oil. Shurtape Colonial Masking Tape can be used in industrial and automotive paint applications that do not require the use of a bake oven. |
Shurtape CP-106 Economy Grade Masking Tape
 Shurtape CP-106 Economy Grade Masking Tape is an economy grade high adhesion crepe paper masking tape with thermoplastic rubber adhesive. Designed for general purpose packaging, bundling, holding, splicing, masking and labeling for home, school and industry. Offers a patented thermoplastic adhesive that allows a 100% surface contact area to the substrate with clean removal properties. Economical, but with good performance on variety of substrates. Has excellent quick stick and holding power on cardboard plus good low temperature properties. |
Shurtape CP-27 14-Day Blue Painters Tape
 Shurtape CP-27 14-Day Blue Painters Tape is also known as 14-Day ShurRELEASE Professional Grade Crepe Paper Masking Tape. Shurtape Blue Painters Tape can be used on glass, vinyl, metal, wood, painted walls and trim where clean removal is required after and up to fourteen days of exposure to direct sunlight. It is NOT recommended for use on wallpaper, unpainted wallboard, ceiling tile or with uncured coatings. For delicate surfaces like wallpaper, drywall and ceiling tile use Shurtape CP-28. Shurtape CP 27 has excellent 14-day UV resistance and good performance for a variety of applications that require easy removal. |
Shurtape CP-28 30-Day Purple Painters Tape
 Shurtape CP-28 30-Day Purple Painters Tape, also known as 30 Day ShurRELEASE, is designed for painting and general purpose applications that require a delicate surface adhesive system or where a low tack, high performance tape is needed. It can be applied to delicate surfaces for up to 30 days and then can be removed cleanly without causing surface damage. Specific applications for Shurtape CP 28 include: wallpaper, freshly painted or unpainted wallboard/drywall, ceiling tiles, or masking for faux finishing. Has an acrylic-based adhesive. Features of Shurtape CP-28 include: Clean removal for up to 30 days. Flexible and conformable. UV resistant. |
Shurtape CP-60 60-Day Razor Edge Painters Tape
 Shurtape CP-60 60-Day Razor Edge Painters Tape, also known as 60 Day ShurRELEASE, is an ultra thin painter's tape for razor sharp lines. It leaves only the sharpest, cleanest lines - perfect for painting stripes, diamonds, and other patterns on walls. It is perfect for striping. With a low tack adhesive, it removes cleanly from delicate surfaces and won't damage painted drywall or faux finishes. Its special paper backing reduces bleed-through. Shurtape CP 60 has an acrylic-based adhesive and it designed for the professional paint market. |
Shurtape CP-632 Colored Masking Tape
 Shurtape CP-632 Colored Masking Tape is an economical general purpose tape for use in packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating and identification. Flexible; resistant to water, oil, and solvents; and provides excellent adhesion and release from a variety of substrates. Has multiple uses for home, school, and industry. Has a crepe paper backing and a rubber-based adhesive. For black masking tape in widths over 2 inches please see JVCC JV497 Masking Tape. |
Shurtape CP-83 Utility Grade Masking Tape
 Shurtape CP-83 Utility Grade Masking Tape is a general purpose crepe paper masking tape. It is water and oil resistant and provides good adhesion, excellent quick stick, flexibility and ease of use. Shurtape CP 83 is designed for for use in general purpose packaging, bundling, holding, splicing, tabbing and banding applications. It is not recommended for exacting industrial masking, spray painting or oven baking applications. |
JVCC CSD Carton Sealing Tape Dispenser
 JVCC CSD Carton Sealing Tape Dispenser is a hand held durable tape dispenser for carton sealing tapes. Side loaded, adjustable break, anti-reverse bar, rubber roller, blade safety guard, wipedown plate. Two sizes are available - one for tapes up to 2 inches wide and one for tapes up to 3 inches wide. The maximum diameter of the rolls it can hold is 5 inches. |
JVCC DC-1109R/P Double Coated Removable/Permanent Tape (Rubber Adhesive)
 JVCC DC-1109R/P Double Coated Removable/Permanent Tape is a clear polyester film differentially coated with a removable (low tack) and permanent (high tack) synthetic rubber adhesive system. The liner side (the tape exposed once you remove the liner) is coated with a controlled low tack, highly removable clear adhesive system which exhibits moderate adhesion to a variety of surfaces, but has excellent removability. The exposed side (the tape visible once you unwind it from the roll) is coated with an aggressive, high tack, clear synthetic copolymer adhesive which forms a long-term bond immediately upon contact. JVCC DC-1109R/P double-sided removable/permanent tape complies the FDA Code of Regulations Title 21, Part 175, Subpart B, Section 175.105 which covers the use of adhesive tapes for indirect food contact. |
JVCC DC-1114 Double Coated Film Tape (Rubber Adhesive)
 JVCC DC-1114 Double Coated Film Tape is a clear thin polyester film coated with an aggressive synthetic hot melt rubber adhesive and wound on a 2.7 mil white siliconized paper release liner. It offers superior moisture resistance in humid conditions once bonded. JVCC DC-1114 double-sided film tape has excellent quick-stick properties and offers moderate temperature resistance. Perfect for splicing of papers, plastics, films, foils, etc. Used in general purpose bonding, mounting, and laminating applications (nameplates, mouse pad assembly, etc.). The tape has an environmentally friendly solventless adhesive and is RoHS compliant. |
JVCC DC-1503 Double Coated Film Tape (Rubber Adhesive)
 JVCC DC-1503 Double Coated Film Tape is a clear BOPP (polypropylene) film tape with a synthetic hot melt rubber adhesive on a gold siliconized liner. Used for core start-ups, splicing, holding, joining, attaching, mounting, and laminating applications. Good tack on flat surfaces. |
JVCC DC-4109RS Double Coated Film Tape (Acrylic Adhesive)
 JVCC DC-4109RS Double Coated Film Tape is a polyester film substrate coated on both sides with a modified solvent-free water-based acrylic adhesive (the adhesive has a one hour dwell time). Perfect for splicing of various materials such as papers, plastics, films and foils. Can be used for mounting nameplates, keyboard assembly, and laminating dissimilar metals. JVCC DC 4109RS Double-Coated Film Tape features: Comes on a gold siliconized paper liner. Superior moisture resistance in high humidity. Excellent low and high temperature performance. Temperature Resistance up to 392DF short term. |
JVCC DC-4110R/P Double Coated Removable/Permanent Tape (Acrylic Adhesive)
 JVCC DC-4110R/P Double Coated Removable/Permanent Tape is a clear polyester film differentially coated with a removable (low tack) and permanent (high tack) acrylic adhesive system. The liner side (the tape exposed once you remove the liner) is coated with a controlled low tack, highly removable clear adhesive system which exhibits moderate adhesion to a variety of surfaces, but has excellent removability. The exposed side (the tape visible once you unwind it from the roll) is coated with an aggressive, high tack, high peel, high shear, permanent clear acrylic adhesive. Both adhesives are excellent in low and moderate temperatures and are resistant to UV, moisture, some solvents, mild acids, oil and grease. JVCC DC-4110R/P double-sided removable/permanent tape is latex-free and has excellent adhesion to metals, glass, films, paper and some treated polyolefins. For manufacturing reclosable bags/pouches/envelopes; core start ups; end tabbing paper/foils/films; mounting promotional, advertising and point of purchase displays that can be removed/replaced/repositioned; temporary holding of packaging/protective materials during shipment; temporary laminating applications; making removable stickers and labels. |
JVCC DC-4408SW Double Coated Differential Tape (Linerless)
 JVCC DC-4408SW Double Coated Differential Tape (Linerless) is a self-wound transparent PVC film, differentially coated with a high tack/low tack acrylic adhesive system for a smooth and easy unwind. Especially suited for applications where a liner would be a hindrance. JVCC DC-4408SW is used for bag sealing; core start-ups; splicing of plastics, metal foils, paper and cardboard. Its differential adhesive system makes this tape ideal as a closure system for thin film bags. Also used for mounting in the graphic arts industry. |
JVCC DC-4414W Double Coated PVC Film Tape
 JVCC DC-4414W Double Coated PVC Film Tape is a white PVC film coated on both sides with a solvent based acrylic adhesive. Extremely aggressive adhesive will bond to nearly all materials (has just one minute dwell time). Has excellent temperature, UV, aging, and water vapor resistance. Comes on a gold siliconized paper release liner. JVCC DC-4414W double-sided tape is used for secure attachment of extruded plastic profiles in furniture and general industries and to mount signs and large format graphics. Also recommended for bonding trims in automotive and other industries. |
JVCC DC-4420 Double Coated White PVC Tape
 JVCC DC-4420 Double Coated PVC Tape is a white PVC film coated on both sides with a solvent based acrylic adhesive. On a gold siliconized paper liner. The adhesive system of this two-sided tape is aggressive and will bond to nearly all materials (even on difficult surfaces like foams, PE and PP films). It has excellent temperature, UV, aging, and water vapor resistance. Used for bonding rubber, plastic, metal, and wood substrates. Also for permanent mounting of nameplates and decorative trim on appliances and furniture. |