
![]() | A flat design with square edges. |

![]() | A copy of the Halo titanium rings that appeared in the movie Charlie's Angels Full Throttle. |

![]() | A flat design only 1mm thick for a low profile and extra comfort. |

![]() | A flat design with rounded corners. |

![]() | 10 degree angles produce a ridge in the center. |

![]() | 10 Degrees on one side 20 degrees on the other produce an off-center ridge. |

![]() | A flat ring with 45 degree angles on the corners. |

![]() | This ring is divided into thirds with slight angles on the sides giving it a faceted look. |

![]() | Two steps on the sides leave a raised band in the middle. |

![]() | A flat ring with round cut-out corners. |

![]() | A thin groove runs down the center of this ring. Can be made with a half brushed and half polished finish as shown or all brushed or all polished. |

![]() | A 1.5 mm wide round groove on a flat ring. |

![]() | A copy of the ring that appeared in the movie The Abyss. |

![]() | Two thin grooves in the center with beveled edges. |

![]() | This ring has 15 degree angled edges with a round center groove. |

![]() | A lightly domed ring. Has a very nice mirror like reflection. |

![]() | A domed half round style ring. |

![]() | Slight angles on the edges and dual grooves in the center. |

![]() | A wide center and 25 degree angled edges are separated by 2 thin grooves. |

![]() | This ring has a blue anodized groove. |

![]() | Angled sides and 2 very thin grooves divide this ring into thirds. This is a very stylish modern day ring. |

![]() | A 1mm wide silver inlay in a flat band. |

![]() | A 2mm wide silver inlay in a flat band. |

![]() | A 3mm wide silver inlay in a flat band. |

![]() | Two 1mm wide silver inlays spaced 1mm apart in a flat band. |

![]() | Abyss ring with 1mm silver inlays. |

![]() | Three evenly spaced grooves on a flat ring. |

![]() | A flat band with two 1mm stripes of gold spaced 1mm apart. |

![]() | The abyss ring with 1mm wide gold inlaid into the grooves. |

![]() | A flat band with a 3mm stripe of gold. |

![]() | A 1.75mm stripe of gold with 15 degree angled sides. |

![]() | A 3mm stripe of gold with 15 degree angled sides. |

![]() | Flat with two 1.5mm wide round grooves equally spaced. |

![]() | A lightly domed ring with a 1mm stripe of gold. |

![]() | Two 2mm wide silver inlays spaced 1mm apart in a flat ring. |

![]() | Three 1mm wide silver inlays spaced 1mm apart in a flat ring. |

![]() | A 1mm wide silver inlay in a lightly domed ring. |

![]() | A 2mm wide silver inlay in a lightly domed ring. |

![]() | Two 1mm wide silver inlays spaced 1mm apart in a lightly domed ring. |